Aladdinbox Skycube/Instone mini Firmware

3.75 out of 5 based on 4 customer ratings
4 Review(s)

in stock
Only registered users can download this free product.

Description

This is a special cut of Marlin Bugfix 1.1.x setup specifically for the iNSTONE mini/Aladdinbox Skycube.
This has mesh bed leveling enabled in a 4×4 grid to allow easy bed leveling with Z compensation, and other small tweaks to increase the quality of your prints!
There are detailed instructions for installing the firmware in the .ZIP file.

4 reviews for Aladdinbox Skycube/Instone mini Firmware

  1. Rated 1 out of 5

    xelahab

    Does not work. Error compiling

  2. Rated 4 out of 5

    kaffee

    I tried compiling this firmware in Arduino. However it failes saying “Arduino: 1.8.5 (Windows 10), Board: “Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)”

    sketch\Marlin_main.cpp: In function ‘void gcode_M304()’:

    Marlin_main.cpp:9636: error: ‘class Temperature’ has no member named ‘bedKp’

    if (parser.seen(‘P’)) thermalManager.bedKp = parser.value_float();

    ^

    Marlin_main.cpp:9637: error: ‘class Temperature’ has no member named ‘bedKi’

    if (parser.seen(‘I’)) thermalManager.bedKi = scalePID_i(parser.value_float());

    ^

    Marlin_main.cpp:9638: error: ‘class Temperature’ has no member named ‘bedKd’

    if (parser.seen(‘D’)) thermalManager.bedKd = scalePID_d(parser.value_float());

    ^

    In file included from sketch\Marlin.h:45:0,

    from sketch\Marlin_main.cpp:252:

    Marlin_main.cpp:9641: error: ‘class Temperature’ has no member named ‘bedKp’

    SERIAL_ECHOPAIR(” p:”, thermalManager.bedKp);

    ^

    sketch\serial.h:62:77: note: in definition of macro ‘SERIAL_PROTOCOLPAIR’

    #define SERIAL_PROTOCOLPAIR(name, value) serial_echopair_PGM(PSTR(name),(value))

    ^

    sketch\Marlin_main.cpp:9641:5: note: in expansion of macro ‘SERIAL_ECHOPAIR’

    SERIAL_ECHOPAIR(” p:”, thermalManager.bedKp);

    ^

    Marlin_main.cpp:9642: error: ‘class Temperature’ has no member named ‘bedKi’

    SERIAL_ECHOPAIR(” i:”, unscalePID_i(thermalManager.bedKi));

    ^

    sketch\serial.h:62:77: note: in definition of macro ‘SERIAL_PROTOCOLPAIR’

    #define SERIAL_PROTOCOLPAIR(name, value) serial_echopair_PGM(PSTR(name),(value))

    ^

    sketch\Marlin_main.cpp:9642:5: note: in expansion of macro ‘SERIAL_ECHOPAIR’

    SERIAL_ECHOPAIR(” i:”, unscalePID_i(thermalManager.bedKi));

    ^

    sketch\Marlin_main.cpp:9642:28: note: in expansion of macro ‘unscalePID_i’

    SERIAL_ECHOPAIR(” i:”, unscalePID_i(thermalManager.bedKi));

    ^

    Marlin_main.cpp:9643: error: ‘class Temperature’ has no member named ‘bedKd’

    SERIAL_ECHOLNPAIR(” d:”, unscalePID_d(thermalManager.bedKd));

    ^

    sketch\serial.h:62:77: note: in definition of macro ‘SERIAL_PROTOCOLPAIR’

    #define SERIAL_PROTOCOLPAIR(name, value) serial_echopair_PGM(PSTR(name),(value))

    ^

    sketch\serial.h:71:40: note: in expansion of macro ‘SERIAL_PROTOCOLLNPAIR’

    #define SERIAL_ECHOLNPAIR(pre,value) SERIAL_PROTOCOLLNPAIR(pre, value)

    ^

    sketch\Marlin_main.cpp:9643:5: note: in expansion of macro ‘SERIAL_ECHOLNPAIR’

    SERIAL_ECHOLNPAIR(” d:”, unscalePID_d(thermalManager.bedKd));

    ^

    sketch\Marlin_main.cpp:9643:30: note: in expansion of macro ‘unscalePID_d’

    SERIAL_ECHOLNPAIR(” d:”, unscalePID_d(thermalManager.bedKd));

    ^

    exit status 1
    ‘class Temperature’ has no member named ‘bedKp’

    Any idea where this comes from?

  3. Rated 5 out of 5

    kaffee

    The author was so kind to send me instructions, now it does compile and the new firmware works. Good work, thank you.

  4. Rated 5 out of 5

    xelahab

    Отлично работает! Автор все исправил!

Add a review

Your email address will not be published. Required fields are marked *

Theme Settings